Description
The SEKO ProFlex four-product chemical dilution system mixes concentrated cleaning chemicals with mains water at a set ratio and dispenses ready-to-use solution. This model has three low-flow outlets at 4 litres per minute for filling spray bottles and one high-flow outlet at 14 litres per minute for filling mop buckets, sinks or scrubber dryers. Each channel is button activated. Dilution is by venturi, with no peristaltic tube to wear out, which cuts consumable waste and servicing. An integrated air gap provides backflow protection, and the unit is listed against WMTS 101:2021 clause 8.2 and AS 2845.2:1996, so it can be plumbed in to a potable supply. It wall mounts in an ABS casing and needs an inlet pressure of 100 to 600 kPa with water up to 60 degrees Celsius. Modular units can be added as a site’s chemical range grows.
- Three low-flow outlets at 4 L/min (bottle fill) plus one high-flow outlet at 14 L/min (bucket fill)
- Button activation on all four channels
- Venturi dilution with no tubing to replace
- Integrated air gap backflow prevention; WMTS 101:2021 clause 8.2 and AS 2845.2:1996
- Inlet pressure 100 to 600 kPa, water up to 60 degrees C, ABS casing
